Table Of Contents
8.1.17 Trigger BW 1015
8.1.18 Zero Span Delay Compensation On/Off 1016
8.1.19 Select PXI Line 1016
8.1.20 Reset Sync Monitor 1017
8.1.21 Trigger Optimization 1018
8.1.22 Trigger Settings Diagram 1019
8.2 Gate Source 1020
8.2.1 Select Gate Source 1020
8.2.2 Sync Holdoff 1021
8.3 Gate Settings 1023
8.3.1 Gate On/Off 1023
8.3.2 Gate View On/Off 1024
8.3.3 Gate Delay 1026
8.3.4 Gate Length 1027
8.3.5 Gate Method 1028
8.3.6 Control Edge/Level 1029
8.3.7 Gate Holdoff 1030
8.3.8 Gate View Sweep Time 1031
8.3.9 Gate View Start Time 1032
8.3.10 Gate Delay Compensation 1033
8.3.11 Min Fast Position Query (Remote Query Only) 1034
8.3.12 Gate Preset (Remote Command Only) 1035
8.3.13 Gate Level (Remote Command Only) 1035
8.3.14 Gate Polarity (Remote Command Only) 1035
8.4 Enables the hardware accelerated stepped FFT gating feature
(Display only) 1037
8.5 Periodic Sync Src 1038
8.5.1 Select Periodic Timer Sync Source 1038
8.6 Auto/Holdoff 1039
8.6.1 Trig Holdoff 1039
8.6.2 Auto Trig 1039
8.6.3 Holdoff Type 1040
9 Programming the Instrument 1042
36 IQ Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
