This tab has the following controls and indicators:
Input File Section
File Format
For details on the available file format, see Description.
Sample waveform data files are available in different formats as listed in
the Table 13 .
These files can be simply imported using the Input File section and can be sent
to the instrument to view the waveform preview. The sample waveform data
can be found at the location: Start > All Programs > Keysight M8195 >
Keysight M8195 Examples
The following are the steps to view the sample data file waveform preview:
1 Select the Show Next Waveform Preview check box.
2 Select the required File Format from the drop-down list.
3 Click File…
4 In the Open dialog box, select the sample waveform file (as per selected
file format)
5 Click Open.
6 Click Send to Instrument.
Table 13: Sample waveform data files
N5110 Data With Embedded Marker Bits
This checkbox is only enabled, if the File Format is BIN5110. If checked, the
BIN5110 format with 14-bit data for I and Q and embedded marker bits is
used. If unchecked, the BIN5110 format with 16-bit data for I and Q and no
marker bits is used.
File…
Open a file selection dialog. Default file extensions match the File Format
selection. Successful loading of a waveform updates multiple information
fields through the panel reflecting the waveform settings and a graph of the
waveform is shown in the preview display.
To Next Page
Loading...
