Kodak Dryview 5800 - Page 109

2G0947 - 31JAN08 3-67
Adjustments and Replacements
2. Disconnect the FAN CONNECTOR.
3. Remove:
• 2 SCREWS
• LOWER FILM SEPARATION FAN
4. Disconnect the MOTOR CONNECTOR.
5. Disengage the BELT from the PULLEY.
6. Remove:
• 4 SCREWS
• FEED ROLLER NIP OPEN/CLOSE MOTOR
MOTOR
CONNECTOR
FEED ROLLER NIP
OPEN/CLOSE MOTOR
BELT
PULLEY
4 SCREWS
FAN
CONNECTOR
2 SCREWS
LOWER FILM
SEPARATION FAN