Kodak Dryview 5800 - Configuring the CARESTREAM REMOTE MANAGEMENT SERVICES

2G0947 - 31JAN08 2-27
Installation Instructions
Configuring the CARESTREAM REMOTE MANAGEMENT SERVICES
1. Will the CARESTREAM REMOTE MANAGEMENT SERVICES be
enabled on the IMAGER?
2. Select Configuration>System>Remote Management.
3. Select the "Identification" tab.
4. Are all fields filled in correctly?.
5. Select the "Network Settings" tab.
Yes No
Continue with Step 2. Advance to Step 18.
Yes No
Continue with Step 5.a.Return to “Setting up Service
Tracking”.
b. Make corrections as necessary
and save the screen.
c. Return to this screen.
d. Check that all fields are
correct.
e. Continue with Step 5.