Kodak Dryview 5800 - FILM DIVERTER AY and FELT PAD AY

2G0947 - 31JAN08 3-33
Adjustments and Replacements
FILM DIVERTER AY and FELT PAD AY
Prerequisites: None
To Remove:
CAUTION:
Hot Surface
When the IMAGER is initially de-energized, the PROCESSOR
DRUM and ROLLERS are hot. Take care when working in the area
of the PROCESSOR.
1. Open the TOP COVER.
2. Remove:
• HEAT SHIELD
• 2 SCREWS
• FELT PAD AY
• FILM DIVERTER AY
To Install: 1. Clean the SIDEPLATES by scraping away the residue with a SCRAPER.
2. After scraping, thoroughly vacuum the area.
3. Wipe clean the SIDEPLATES with ALCOHOL WIPES.
FELT PAD AY
HEAT SHIELD
2 SCREWS
SIDE PLATE
PROCESSOR
DRUM AY
FILM DIVERTER AY