Kodak Dryview 5800 - IMAGING AY - Start Index Delay, Start of Scan

2G0947 - 31JAN08 3-7
Adjustments and Replacements
IMAGING AY - Start Index Delay, Start of Scan
Adjustment Specification
Purpose: To adjust Start of Scan timing to center an image left to right on the film.
Specification: Borders on the left and right of the image should be equal.
Special Tools:
• LAPTOP COMPUTER with Microsoft INTERNET EXPLORER V 5.5
or higher
• SERVICE TOOL
• CROSSOVER CABLE TL5568
Prerequisites None
To Check 1. Log on to the SERVICE TOOL (see Installation Instructions, “Logging
Onto the SERVICE TOOL” on page 2-4).
2. From the Service menu, select Diagnostics>DRE>Advanced Test Print.
3. In the Test Profile field, use the drop-down menu to select "Smpte8Bit".
4. Click [Run].
5. Check the left and right borders, they should be equal.