Kodak Dryview 5800 - MOTOR, PICKUP DRIVE - UPPER (M3 U) and LOWER (M3 L)

3-78 2G0947 - 31JAN08
Adjustments and Replacements
MOTOR, PICKUP DRIVE - UPPER (M3U) and LOWER (M3L)
Prerequisites: Remove the “PICKUP AY - UPPER” or “PICKUP AY - LOWER”.
To Remove:
IMPORTANT:
This procedure is used for both UPPER and LOWER PICKUP AY.
1. Grip the BASE and VACUUM BAR AY and gently pull to extend the
PICKUP AY to full length.
2. Disconnect the CONNECTOR.
3. Remove:
• 2 E-RINGS
• 2 GEARS
• 4 SCREWS
• PICKUP DRIVE MOTOR
To Install: 1. Reverse the steps in the removal procedure.
4 SCREWS
CONNECTOR
PICKUP DRIVE
MOTOR
BASE
VACUUM BAR AY
2 E-RINGS
2 GEARS