2G0947 - 31JAN08 5-73
Diagnostics
Condition Code: 21-145 or 23-145
Description
The IMAGER obtains the media type and CE mark information from the RF
TAG when the FILM TRAY is loaded or when the IMAGER power is turned
on. This error occurs if the IMAGER does not support the type at all. It also
occurs if the IMAGER has been configured (via the SERVICE TOOL) to reject
the type or CE mark. The error is cleared when a FILM TRAY is re-inserted
after being removed.
System Impact
One or more feed magazine(s) is unable to print. The spooler is still able to
accept and queue jobs and continue printing from any other available supply
tray.
User Action
1. The IMAGER has not been configured to use this film type.
2. Try a different film type or reconfigure the IMAGER.
3. If the error persists, call for service.
FE Action
Web Portal Message Log Message DICOM Message Severity
xxxxx Supply: Unsupported
Film Type
xxxxx Supply: Media Type in
film pack is not supported
BAD SUPPLY MGZ 1-Alert
To Next Page
Loading...
