2G0947 - 31JAN08 2-7
Installation Instructions
Moving the IMAGER
1. Move the IMAGER and accessories to the installation area.
2. Position the IMAGER to allow a space of at least 1 m (39 in.) at the back
of the IMAGER for installation of the POWER CORD and NETWORK
CABLE.
Removing the SHIPPING RESTRAINTS and Packing Material
1. Open the TOP COVER.
2. Loosen 2 Captive THUMB SCREWS.
3. Remove the LEFT PANEL.
TOP COVER
2 Captive
THUMB
SCREWS
LEFT PANEL
To Next Page
Loading...
