Kodak Dryview 5800 - Motor, Turnaround Roller Drive (M9)

2G0947 - 31JAN08 3-47
Adjustments and Replacements
MOTOR, TURNAROUND ROLLER DRIVE (M9)
Prerequisites: Remove:
• “FRONT PANEL”
• “RIGHT PANEL”
• CHARCOAL FILTER
To Remove:
1. Disconnect the CONNECTOR.
2. Remove:
• E RING
• BELT
• PULLEY
• 4 SCREWS
• TURNAROUND MOTOR
To Install: 1. Reverse the steps in the removal procedure.
CONNECTOR
TURNAROUND
MOTOR
4 SCREWS
E RING
PULLEY
BELT