2G0947 - 31JAN08 5-69
Diagnostics
Condition Code: 21-127 or 23-127
Description
This notification occurs if the leading edge of the film does not reach the
START OF PAGE (SOP) SENSOR (S8) as a result of being fed from the supply
to the exposure assembly. The film may not have gone into the FEED
ROLLERS, so the entire pickup/feed sequence will be restarted for 1 retry. If
the retry subsequently fails, then error 26-325 will be generated, as well as
either a 2x-116 or 2x-126 error.
System Impact
None - the system will function normally.
User Action
None
FE Action
Web Portal Message Log Message DICOM Message Severity
None xxxxx Supply: Film feed retry.
Film did not feed successfully to
SOP sensor (S8) in specified
time.
NORMAL 3-Notify
To Next Page
Loading...
