3-92 2G0947 - 31JAN08
Adjustments and Replacements
DRE MOTHERBOARD
Prerequisites: 1. Do “Making a Configuration Backup” on page 8-1.
2. Remove the “RIGHT PANEL”.
To Remove:
When installing CIRCUIT BOARDS, always use a WRIST STRAP to prevent
damage from electrostatic discharge.
1. Disconnect the CONNECTORS.
2. Remove:
• 4 SCREWS
• DRE MOTHERBOARD
To Install:
The DRE to DPB USB CABLE must be plugged into the outside CONNECTOR.
4 SCREWS
CONNECTORS
DRE MOTHERBOARD
To Next Page
Loading...
