2G0947 - 31JAN08 2-21
Installation Instructions
5. Select Utilities>Session>Restart.
6. Click [Restart].
Wait for the IMAGER to restart.
7. Continue with “Loading Customer Film”.
Loading Customer Film
1. Load customer film into the FILM SUPPLY.
2. Install the FILM SUPPLY.
3. Continue with “Checking the Installed Hardware and Film Type”.
Checking the Installed Hardware and Film Type
1. Select Configuration>Hardware>Installed Hardware.
2. Under Film Options, for Clear, Blue, Blue Plus, and CE Mark, select YES
or NO from the drop-down menu.
3. Click [Save].
4. Continue with “Doing the SCP Services Configuration”.
To Next Page
Loading...
