2G0947 - 31JAN08 3-17
Adjustments and Replacements
FRONT PANEL
Prerequisites: Remove the FILM TRAYS.
To Remove: 1. De-energize the IMAGER (see Installation Instructions, “De-energizing
the IMAGER” on page 2-3).
2. Open:
• TOP COVER
• FRONT PANEL
3. Disconnect the LOCAL PANEL CONNECTOR.
4. Remove 2 SCREWS from the FRONT PANEL holding the 2
LANYARDS.
5. Tip the FRONT PANEL out and lift it from the IMAGER.
To Install: 1. Reverse the steps in the removal procedure.
2 SCREWS
LOCAL PANEL
CONNECTOR
FRONT PANEL
2 LANYARDS
TOP COVER
To Next Page
Loading...
