Kodak Dryview 5800 - TURNAROUND IDLER SHAFTS and ROLLERS

2G0947 - 31JAN08 3-45
Adjustments and Replacements
TURNAROUND IDLER SHAFTS and ROLLERS
Prerequisites: Remove:
• “RIGHT PANEL”
• “LEFT PANEL”
• “FRONT PANEL”
• CHARCOAL FILTER
To Remove:
IMPORTANT:
This procedure is used for all 3 IDLER SHAFTS and the 9 ROLLERS.
1. Remove:
• 2 SCREWS
• 2 BUMPERS
• LIGHT SHIELD
2. Disconnect the CONNECTOR to the DENSITOMETER.
3. Remove:
• 2 SCREWS
• EXIT TRAY
LIGHT SHIELD
2 SCREWS
2 BUMPERS