5-70 2G0947 - 31JAN08
Diagnostics
Condition Code: 21-130 or 23-130
Description
This error occurs only while attempting to pick up a film. The FILM
SEPARATED SENSOR (S3x) is in an incorrect state for PICKUP is in home
position, prior to film lift. The error is cleared when a FILM TRAY is
re-inserted after being removed.
System Impact
One or more feed magazine(s) is unable to print. The spooler is still able to
accept and queue jobs and continue printing from any other available supply
tray.
User Action
1. Cover the FILM TRAY with the FILM SAVER.
2. Remove the FILM TRAY from the IMAGER.
3. Re-insert the FILM TRAY and remove the FILM SAVER.
4. If the error persists, call for service.
FE Action
Web Portal Message Log Message DICOM Message Severity
xxxxx Supply: Internal
Hardware Failure
xxxxx Supply: Film Separation
Sensor (S3x) stuck on
FILM TRANS ERR 1-Alert
To Next Page
Loading...
