2-22 2G0947 - 31JAN08
Installation Instructions
Doing the SCP Services Configuration
1. Have each SCU send an image to make a connection with the IMAGER.
2. Select Configuration>DICOM SCP>SCP Configuration.
3. When the SCP Configuration screen appears, select the "SCP Config
AutoSetup" tab.
Note:
• The information in the SCU field includes, in order: IP Address and AE
Title of the SCU that will send the image, and AE Title of the destination.
• The parameter values on the screen apply to the modality identified in the
SCU field.
4. At the top of the screen, use the drop-down menu to select an SCU.
5. Is the information for the selected SCU correct?
6. After the configuration of all SCUs is completed, continue with
“Checking Image Quality”.
Yes No
Do Step 4 and Step 5 for each SCU in
the list.
a. Click Modify.
b. From the drop-down menus select
the correct information.
c. Click Save.
d. Do Step 4 and Step 5 for each SCU
in the list.
To Next Page
Loading...
