2G0947 - 31JAN08 3-77
Adjustments and Replacements
PICKUP AY - LOWER
Prerequisites: Remove:
• “FRONT PANEL”
• “LEFT PANEL”
To Remove:
1. Disconnect the CONNECTOR.
2. Remove:
• SCREW (inner) on the inside of the FILM TRAY slot.
• SCREW (outer) on the outside of framework.
3. Disconnect the TUBING.
4. Pull the PICKUP AY through the slot on the left side of IMAGER and
place it on a flat, stable surface.
To Install: 1. Reverse the steps in the removal procedure.
SCREW
(outer)
SCREW
(outer)
SCREW
(inner)
FILM PICKUP AY
CONNECTOR
TUBING
SCREW
(inner)
To Next Page
Loading...
