2G0947 - 31JAN08 2-3
Installation Instructions
Energizing the IMAGER
Dangerous voltage present.
1. Check that the AC POWER CORD is connected into the back of the
IMAGER and into the wall OUTLET.
Double Pole/Neutral Fusing.
2. Press the POWER SWITCH on the IMAGER to the ON position.
De-energizing the IMAGER
Double Pole/Neutral Fusing.
1. Press the POWER SWITCH on the IMAGER to the OFF position.
Dangerous voltage present.
2. Disconnect the AC POWER CORD from the wall OUTLET.
To Next Page
Loading...
Need help?
General