5-74 2G0947 - 31JAN08
Diagnostics
Condition Code: 21-146 or 23-146
Description
The IMAGER obtains the media size information from the RF TAG when the
FILM TRAY is loaded or when the IMAGER power is turned on. This error
occurs if the IMAGER does not support the size. The error is cleared when a
FILM TRAY is re-inserted after being removed.
System Impact
One or more feed magazine(s) is unable to print. The spooler is still able to
accept and queue jobs and continue printing from any other available supply
tray.
User Action
1. The IMAGER has not been configured to use this film size.
2. Try a different film size or reconfigure the IMAGER.
3. If the error persists, call for service.
FE Action
Web Portal Message Log Message DICOM Message Severity
xxxxx Supply: Unsupported
Film Size
xxxxx Supply: Media Size in
film pack is not supported
BAD SUPPLY MGZ 1-Alert
To Next Page
Loading...
