Kodak Dryview 5800 - Diagnostics and Troubleshooting; Interface and Status Indicators

2G0947 - 31JAN08 5-1
Section 5: Diagnostics
Using the SERVICE SWITCH
The SERVICE SWITCH is located behind the FRONT PANEL at the top
right front of the IMAGER.
1. Open:
• TOP COVER
• FRONT PANEL
2. To activate the SERVICE SWITCH, turn the activator SCREW
counterclockwise.
The "Service Mode" icon appears on the LOCAL PANEL.
3. To deactivate the SERVICE SWITCH, turn the activator SCREW
clockwise.
The "Service Mode" icon disappears from the LOCAL PANEL.
SERVICE
SWITCH
Activator
SCREW
FRONT PANEL