5-80 2G0947 - 31JAN08
Diagnostics
Condition Code: 26-325
Description
This error occurs if the leading edge is not detected at the START OF PAGE
(SOP) SENSOR (S8) in a timely manner. This error commonly occurs in
conjunction with 2x-126. If it occurs alone, it is most likely an electronics issue.
The error is cleared when either FILM TRAY is removed and reinserted or
when the TOP COVER is opened and then closed.
System Impact
The printer is unable to print films. The spooler is still able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted.
User Action
1. If this error occurred at the same time as 21-126 or 23-126, follow the
instructions for 21-126 or 23-126.
2. If this error occurred alone, open and close the TOP COVER to clear the
error.
3. Shut down the IMAGER, then start the IMAGER.
4. If the error persists, call for service.
FE Action
1. Clear the jam (see “Film Jam - Error Code 26-325” on page 5-110).
Web Portal Message Log Message DICOM Message Severity
Film Jam in Area 2 Film Jam Entering Exposure
Transport: SOP sensor (S8)
failed to detect film leading
edge.
FILM JAM 1-Alert
To Next Page
Loading...
