2G0947 - 31JAN08 5-109
Diagnostics
Film Jam - Error Code 2x-126
1. Remove the FILM TRAYS.
2. Remove any misplaced films from Area 1. This area can be accessed
through the FILM TRAY slots.
3. If Area 1 did not contain misplaced films, take the FILM TRAYS to a
dark room and remove the FILM SAVER. Remove any misplaced films
and replace the FILM SAVER.
4. If misplaced films were not found in the TRAY, open and close the TOP
COVER. Wait 2 minutes for misplaced films to emerge from the
IMAGER.
If misplaced films were never located and this error recurs on the next
film, continue with Step 5.
5. Open the TOP COVER.
6. Loosen 2 Captice THUMB SCREWS.
7. Remove the LEFT PANEL.
TOP COVER
2 Captive
THUMB
SCREWS
LEFT PANEL
To Next Page
Loading...
