2G0947 - 31JAN08 5-121
Diagnostics
2. Use the Log Retrieval window to locate the log data you want to view:
• If you have the approximate time when the event you want to view
occurred, select "View Log With Time Range" and enter a Start and End
Time.
• If you want to view the log of an event when the event is occurring, select
View Active Log.
3. Click [OK]. The retrieved log will display.
4. Click [Options] to display a screen of the columns of the log. You can use this
screen to decrease the width of the log.
5. To decrease the log to a usable width, uncheck the columns in the Display field
that are of no use. The items checked above are the most used for
troubleshooting in the field. (The other items are for Software Engineering
use.)
Note: You can also decrease or increase the column width in the log by selecting
the lines between the columns and moving the column left or right.
6. Click [OK].
To Next Page
Loading...
