Kodak Dryview 5800 - Page 28

2-18 2G0947 - 31JAN08
Installation Instructions
16. Click [Modify].
17. Select the "Enable time synchronization" check box.
18. In the IP Address field, type the address of the time SERVER to be used
for synchronization.
19. Select the synchronization period (how often the clock is synchronized)
from the drop-down menu.
20. Select the correct Time Zone from the drop-down menu.
21. If daylight savings time applies in the area of installation, select the
Automatically adjust clock for daylight savings time check box.
22. Click [Save].
23. Continue with “Setting the Host Name and the IP Address”.