2-30 2G0947 - 31JAN08
Installation Instructions
11. Click [Modify].
12. In the "Remote Services Activation" block, select "Remote Monitoring
and Remote Access" from the drop-down menu.
13. Click:
• [Save]
• [Start]
Note: The 2 fields in the Status block will change when the IMAGER is
"registered" with the STATUS LINK SERVER.
14. Select the "Identification" tab.
15. Click:
• [Modify]
• [Download Group List]
16. In the Group Name field, use the drop-down menu to select the group to
which this IMAGER will belong.
17. Click [Save].
18. Select Utilities>Session>Restart.
19. Click [Restart].
Wait for the IMAGER to restart.
20. Continue with “Backing Up the System Configuration”.
To Next Page
Loading...
