3-52 2G0947 - 31JAN08
Adjustments and Replacements
Cut TIE WRAPS that secure the FILM TRANSPORT HARNESS to the
IMAGER FRAME AY
8. Remove 6 SCREWS.
Remove slowly, moving electrical harnesses out of the way.
9. Slide the FILM FEED AY out the left side of the IMAGER and place it
on a flat, stable surface.
To Install:
To prevent damage to CABLES, install new TIE WRAPS in place of those that
were cut.
1. Reverse the steps in the removal procedure.
FILM FEED AY
6 SCREWS
To Next Page
Loading...
