Optional equipment
Precision Seed Drills
MAXIMA 2
179
Lubrication (Every 50 hours)
- Eccentrics.
Trouble shooting guide
Problem Cause Remedy
Incorrect distribution rotation. Metering unit encrusted. Clean metering unit.
Irregular drive. Friction point in metering unit.
Check the condition of the
drive (condition of gears,
sprockets, chains and
tensioners).
Uneven spreading.
Too tight a bend in the seed
delivery pipe.
Shorten the pipe to eliminate
the bend.
Moisture problems.
Damp fertiliser will not flow, do
not use fertiliser unless it is dry.
No distribution.
Applicators blocked. Clean the applicators.
Pipes blocked.
Clear or replace the tube.
Do not work when the tube
inside are too wet.
The safety system shear bolt
has sheared.
Replace the components.
Distributions disengaged.
Check that the lynch pin is in
position and locked
To Next Page
Loading...
