Precision Seed Drills
178
MAXIMA 2
Optional equipment
Checking
During filling, rotate drive wheel by hand to check proper
functioning of the fertilizer and product flow. If no product
comes out of the applicator, this indicates there is a
problem in the setting or that the applicator is clogged.
Search source of malfunction and remedy the problem
prior to resuming sowing operation.
Maintenance
Cleaning the machine
Remove the metering unit assembly to clean the
machine completely.
Removing the metering units
- Disengage the fertilizer.
• Remove lynch pin (1).
• Slide spacer (2) to free distribution drive shaft.
- Loosen knurled knob (1) on each metering unit.
- Remove the unit.
Fertilisers used cause corrosion in the
machine and rapid deterioration.
To Next Page
Loading...
