5-39
Operation on the Machine > Send to Me (Email)
Send to Me (Email)
When user login is enabled, the document is sent to the E-mail address of the logged in user.
Configuring Settings before Sending
To use this function, configure the followings.
• To use this function, the function icon must be displayed in the home screen.
Editing the Home Screen
(page 2-16)
• An E-mail address must be set in user login for the user who logs in.
Adding a User (Local User List)
(page 9-7)
Sending a document to the mail address of the logged
in user
1
Select [Home]( ) key.
2
Select [Send to Me (Email)].
To Next Page
Loading...
