Kyocera 408ci - Device Information

7-13
Status/Job Cancel > Device Information
Device Information
Configure the devices/lines installed or connected to this machine or check their status.
1
Display the screen.
1 Select the [Home]( ) key.
2 Select [Device Information].
The screen to check the status or configure the devices is displayed.
2
Check the Information.
The items you can check are described below.
Identification/Wired Network
You can check ID information such as the model name, serial number, host name and
location, and the IP address of the wired network.
Wi-Fi
You can check the status of Wi-Fi connection, such as the device name, network name and IP
address.
Supplies/Paper
You can check the remaining amount of toner, and paper.
Checking the Remaining Amount of Toner and Paper (
Supplies/Paper) (page 7-15)
Fax
You can check the local fax number, local fax name, local fax ID and other fax information.
FAX Operation Guide
USB/NFC/Bluetooth
You can check the connection status of USB drive, NFC (Near Field Communication) and
Bluetooth keyboard.
•Select [Format] for "USB Drive" to format external media.
•Select [Remove] for "USB Drive" to safely remove the external media.
• Select "Bluetooth" [Connect] to set the Bluetooth keyboard connection.
Option/Application
You can check information on the options and applications that are used.
Capability/Software Version
You can check the software version and performance.
Security
You can check the security information on the machine.
NOTE
Displayed when the optional Wireless Network Interface Kit is installed.
IMPORTANT
When [Format] is selected, all data in the USB drive is erased.