Kyocera 408ci - Changing User Properties

9-11
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Changing User Properties
Types of user properties that could be changed may be different depending on user access privilege.
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
2 Select "User Login Setting" [Add/Edit Local User].
2
Change the user properties.
Changing user properties
1 Select [ ] (information icon) for the user whose properties you wish to change.
NOTE
To change the user information of the machine administrator, you must log in with machine administrator authority.
You can only view user information if you log in as a regular user.
The factory default login user name and login password are set as shown below.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
NOTE
•Select [User Name] or [Login User ID] to sort the user list.
• Search by name or login user name. Select either [Search (Login)] or [Search
(Name)] to switch between [Search (Login)] and [Search (Name)].
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000