Kyocera 408ci - Count by Paper Size

9-47
User Authentication and Accounting (User Login, Job Accounting) > Configuring Job Accounting
Count by Paper Size
This counts the number of pages by paper size (e.g. Letter).
In addition to paper size, media type can also be specified (e.g. count the letter-size color paper used). If you do not
specify the media type, the number of used sheets will be counted for the specified sheet size, regardless of the media
type.
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
2 Select "Job Accounting Setting" [Job Accounting Setting].
2
Configure the settings.
1 "Count by Paper Size" [Paper Size 1 (to 4)] > [On]
2 Select [Paper Size].
3 Select the paper size.
4 Select [Media Type] to specify media type.
5 Select the media type.
6 Select [OK].
NOTE
Paper size is available in four types, 1 to 4. These types are specified in accounting reports.
Print Accounting Report (page 9-50)
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000