Kyocera 408ci - Editing an Account

9-38
User Authentication and Accounting (User Login, Job Accounting) > Job Accounting (Local)
Applying Restriction
Restriction can be applied in the following modes:
Editing an Account
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
2 Select "Job Accounting Setting" [Add/Edit Job Accounting].
2
Edit an account.
1 Select [ ] (information icon) for the account name you wish to edit.
2 Change the account information.
3 Select [Save].
The account information is changed.
*1 This is displayed when the optional FAX Kit is installed.
IMPORTANT
Select [Off], [Use Port 1 Only] or [Use Port 2 Only] as the "Fax Port Restriction" setting.
Item Descriptions
Off No restriction is applied.
Counter Limit Restricts the print counter in one-page increments up to 9,999,999 copies.
Reject Usage Restriction is applied.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
NOTE
• Search by account ID or account name. Select either [Search (ID)] or [Search
(Name)] to switch between [Search (ID)] and [Search (Name)].
•Select [Account Name] or [ Account ID] to sort the account list.
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000