Kyocera 408ci - Continuous Scan; Negative Image; Mirror Image

6-68
Using Various Functions > Functions
Continuous Scan
Scans a large number of originals in separate batches and then produce as one job.
Originals will be scanned continuously until you select [Finish Scan].
Select [On] to use continuous scanning. To use Job Build, select [Job Build]. You can set the functions that appear on
the screen during scanning.
(Value: [Off] / [On] / [Job Build])
Job Build
When [Job Build] is selected when copying or printing, the binding orientation for finished documents can be selected
from [Binding Left], [Binding Right] or [Binding Top].
The following functions can be selected during scanning.
Negative Image
Inverts black and white portions of the image for printing.
(Value: [Off] / [On])
Mirror Image
Copies the mirrored image of the original.
(Value: [Off] / [On])
Advanced
Setup
Advanced
Setup
Functions Functions
Item Description
Next Copy: On Back In duplex copying, prints on the back side if the next page is to be printed on the front
side. Select [On Back] to use this function.
Next Copy: On Front In duplex copying, prints on the front side if the next page is to be printed on the back
side. Select [On Front] to use this function.
Sheet Insertion Inserts a blank paper in the next page. Select [Sheet Insertion] to use this function.
Advanced
Setup
NOTE
This function is only available for black and white copy mode.
Advanced
Setup
Copy
Send
Custom
Box
USB
Drive
1~10
1
1~30
1
11~20
11
21~30
21
Copy
Copy