5-59
Operation on the Machine > Using Document Boxes
Sending Documents in Custom Box
When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
Primary Network (Client) (page 8-66)
1
Display the screen.
[Home]( ) key > [Custom Box] > Select the box
2
Send the document.
1 Select the document you wish to send by checking the checkbox.
The document is marked with a checkmark.
2 Select [Send].
3 Set the destination.
For more information on selecting destinations, refer to the following:
Specifying Destination
(page 5-43)
4 Set the sending size, original image, etc., as desired.
For the features that can be set, refer to the following:
Custom Box (Store File, Printing, Send) (page 6-10)
5 Press the [Start] key.
Sending of the selected document begins.
If a custom box is protected by a password, enter the correct password.
• You cannot select and send multiple documents.
• To deselect, select the checkbox again and remove the checkmark.
Depending on the settings, the address book screen may appear.
Select [Favorites] when registering or recalling favorites.
Registering Favorites
(page 5-10)
Recalling Favorites (page 5-10)
To Next Page
Loading...
