6-44
Using Various Functions > Functions
Combine
Combines 2 or 4 original sheets into 1 printed page.
You can select the page layout and the type of boundary lines around the pages.
The following types of the boundary lines are available.
Layout/Edit Functions
Item Value Description
Off
2 in 1 Layout 2 in 1 (Left to Right/Top to Bottom),
2 in 1 (Right to Left/Bottom to Top)
Select the page layout of scanned originals.
Border Line None, Solid Line, Dotted Line,
Positioning Mark
Select the boundary line type.
Select [Border Line] to select the page
boundary line.
Original
Orientation
Top Edge on Top, Top Edge on Left,
Auto
*1
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
Select the orientation of the original document
top edge to scan correct direction.
Select [Original Orientation] to choose
orientation of the originals, either [Top Edge
on Top] or [Top Edge on Left].
4 in 1 Layout 4 in 1 (Right then Down),
4 in 1 (Left then Down),
4 in 1 (Down then Right),
4 in 1 (Down then Left)
Select the page layout of scanned originals.
Border Line None, Solid Line, Dotted Line,
Positioning Mark
Select the boundary line type.
Select [Border Line] to select the page
boundary line.
Original
Orientation
Top Edge on Top, Top Edge on Left,
Auto
*1
Select the orientation of the original document
top edge to scan correct direction.
Select [Original Orientation] to choose
orientation of the originals, either [Top Edge
on Top] or [Top Edge on Left].
Custom
Box
None Dotted LineSolid Line Positioning Mark
To Next Page
Loading...
