Kyocera 408ci - Replacing Staples (Inner Finisher)

10-14
Troubleshooting > Regular Maintenance
Replacing Staples (Inner Finisher)
When the Staple Unit runs out of staples, the following messages will be displayed. The staple cartridge holder need to
be replenished with staples.
"Staple is empty."
1
Open the inner finisher unit.
2
Remove the Staple Cartridge Holder.
3
Replace the staples.
NOTE
If the Staple Unit runs out of staples, contact your dealer or service representative.
1
1
2