6-59
Using Various Functions > Functions
Insert Sheets/Chapters
Insert a separator sheet, or make the first page of the chapter the front page when performing duplex printing.
The configured pages are displayed on the list.
Layout/Edit
Item Value Description
Off
On Add Separator Separator
Sheet
1 to 998 Enter document page numbers where
separators get inserted. Use [+], [-] or
the numeric keys to enter the page
number.
Paper
Source
Cassette 1 to 4,
MP tray
Select the source of the paper for the
separator.
Chapter Chapter
Page
2 to 998 Enter the page numbers of the original
document where you want to insert the
chapters. Use [+], [-] or the numeric
keys to enter the page number.
Edit ― Change the configuration of the chapter
page and separator. The method of
operation is the same as that of a new
addition.
Delete ― Delete the page selected in the list.
Next > Sheets Setting Not Print, Front
Only, Back
Only
*1
, Duplex
*1
*1 [Back Only] and [Duplex] appear when finishing is set to 2-sided in "Duplex".
Duplex
(page 6-50)
Select [Not Print], [Front Only], [Back
Only], or [Duplex] for the print setting of
the inserted paper.
To Next Page
Loading...
