Kyocera 408ci - Adding a User (Local User List)

9-7
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Adding a User (Local User List)
You can add up to 1000 users (including the default login user name).
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
2 Select "User Login Setting" [Add/Edit Local User].
2
Enter the user information.
[Add] > Enter the user information
NOTE
By default, one of each default user with machine administrator rights and administrator privileges is already stored.
Each user's properties are:
Machine Administrator
User Name: DeviceAdmin
Login User Name: 358ci: 3500, 408ci: 4000, 508ci: 5000
Login Password: 358ci: 3500, 408ci: 4000, 508ci: 5000
Access Level: Machine Administrator
Administrator
User Name: Admin
Login User Name: Admin
Login Password: Admin
Access Level: Administrator
* Upper case and lower case letters are distinguished (case sensitive).
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Item Descriptions
User Name
*1
Enter the name displayed on the user list (up to 32 characters).
Login User Name
*1
Enter the login user name to login (up to 64 characters). The same
login user name cannot be registered.
Login Password
*1
Enter the password to login (up to 64 characters). Reenter the same
password for confirmation.
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000