Kyocera 408ci - Margin;Centering, Margin, Centering

6-46
Using Various Functions > Functions
Margin/Centering, Margin, Centering
Copying/Printing
Add margins (white space). In addition, you can set the margin width and the back page margin.
Centering: Centers the original image on the paper when copying onto paper different from the original size.
Layout/Edit
Advanced
Setup
Functions Functions
NOTE
The default setting for margin width can be changed.
Margin Default (page 8-34)
Item Value Description
Off
Margin Margin Metric: -18 mm to +18 mm
(in 1 mm increments)
Inch: -0.75 to +0.75"
(in 0.01" increments)
Set the margin width.
*1
Use [+], [-] or the numeric keys to enter the margins for
"Left/Right" and "Top/Bottom".
*1 The input units can be changed in System Menu.
Measurement (page 8-7)
Back Page Auto, Manual For duplex copying, select [Back Page] and select
[Auto] or [Manual].
When [Auto] is selected, an appropriate margin is
applied automatically on the rear page depending on a
margin specified for the front page and a binding
orientation.
When [Manual] is set, you can set a different margin
than the front on the back. Set the margin in the screen
that is displayed. The setting selections are the same as
for the front.
Original
Orientation
Top Edge on Top,
Top Edge on Left,
Auto
*2
*2 This function can only be used when the optional OCR Scan Activation Kit is installed.
Select the orientation of the original document top edge
to scan correct direction.
Select [Original Orientation] to choose orientation of
the originals, either [Top Edge on Top] or [Top Edge on
Left].
Centering
*3
*3 Not displayed when printing from USB drive.
Original
Orientation
Top Edge on Top,
Top Edge on Left,
Auto
*2
Select the orientation of the original document top edge
to scan correct direction.
Select [Original Orientation] to choose orientation of
the originals, either [Top Edge on Top] or [Top Edge on
Left].
Copy
Send
Custom
Box
USB
Drive