9-22
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Guest Authorization Settings
When User Login Administration is enabled, set the functions that guest users who cannot log in to the machine are
allowed to use.
Enabling Guest Authorization
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
2 Select "User Login Setting" [Guest Authorization Set.].
2
Configure the settings.
Select [On] or [Off].
To use Guest Authorization Set., User Login Administration must be enabled in "Enabling User Login Administration".
Enabling User Login Administration (page 9-3)
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
• If the guest authorization setting is enabled, the [Authentication/Logout] key must be
selected when logging in.
• In the guest user default settings, only monochrome copying can be used. If you wish to
use a different function, log in as a user who can use that function, or change the settings
in the guest properties.
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000
To Next Page
Loading...
