Kyocera 408ci - Original Size

6-20
Using Various Functions > Functions
Original Size
Specify the original size to be scanned.
Select [Auto (DP)], [Metric], [Inch], [Others] or [Size Entry] to select the original size.
Org./Paper
/Finishing
Org./Sending
Data Format
Functions Functions
Item Value Description
Auto (DP) — Have the size of original detected automatically.
Metric A4, A5, A6, B5, B6, Folio, 216 x 340 mm Select from the Metric series standard sizes.
Inch Letter, Legal, Statement, Executive, Oficio II Select from the Inch series standard sizes.
Others 16K, ISO B5, Envelope #10, Envelope #9,
Envelope #6, Envelope Monarch, Envelope DL,
Envelope C5, Hagaki (Cardstock),
Oufukuhagaki (Return postcard), Youkei 4,
Youkei 2, Custom 1-4
*1
*1 For instructions on how to specify the custom original size, refer to the following:
Custom Original Size (page 8-13)
Select from special standard sizes and custom
sizes.
Size Entry Metric
X: 50 to 356 mm (in 1 mm increments)
Y: 50 to 216 mm (in 1 mm increments)
Enter the size not included in the standard
sizes.
*2
When you have selected [Size Entry], select [+]
or [-] to set the sizes of "X" (horizontal) and "Y"
(vertical). Select the entry field to use the
numeric keys for entry.
*2 The input units can be changed in System Menu. For details, refer to the following:
Measurement (page 8-7)
Inch
X: 1.97 to 14.02" (in 0.01" increments)
Y: 1.97 to 8.50" (in 0.01" increments)
NOTE
Be sure to always specify the original size when using custom size original.
Copy
Send
Custom
Box
USB
Drive