Kyocera 408ci - Text Stamp

6-61
Using Various Functions > Functions
Text Stamp
You can add a text stamp on the documents.
Copying/Printing
*1 The input units can be changed in System Menu.
Measurement (page 8-7)
Layout/Edit
Advanced
Setup
Functions Functions
NOTE
This cannot be set when Text Stamp is set in the system settings.
Printing Jobs (page 8-71)
Item Value Description
Off
On Text Stamp Any text string (up to
32 characters), Template 1 to
8
Select the entry field and enter the text string
to be printed, or select a text stamp from the
displayed templates.
After you have set the stamp, select [Next >].
NOTE
Templates that have been set will appear.
Text (Text Stamp) (page 8-32)
Stamp Method Each Print Page,
Each Original Page
Select the stamp method.
Select [Stamp Method] and set the stamp
method for text stamp.
Position Top Left, Top Middle, Top
Right, Middle Left, Center,
Middle Right, Bottom Left,
Bottom Middle, Bottom Right
Set the stamp position to be printed.
Select [ Position ] and select the text stamp
position.
Specify the detailed stamp position using
numeric values, and to set the stamp position
and angle when a stamp is placed on the
back side of the paper in duplex printing.
Copy
Send
Custom
Box
USB
Drive