Kyocera 408ci - Using the Operation Panel; Operation Panel Keys

2-10
Installing and Setting up the Machine > Using the Operation Panel
Using the Operation Panel
Operation Panel Keys
1[Home]( ) key: Displays the Home screen.
2 Function Key: These keys enable various functions and applications, including copy and scan, to be registered.
3[Energy Saver] key: Puts the machine into Sleep Mode. Recovers from Sleep if in Sleep Mode.
4[Status/Job Cancel] key: Displays the Status/Job Cancel screen.
5[Job Separator] indicator: Blinks when there is paper in the job separator tray.
6[Data] indicator: Blinks while the machine is printing or sending/receiving, or accessing the hard disk/SSD.
7[Attention] indicator: Lights or blinks when an error occurs and a job is stopped.
8 [System Menu/Counter] key: Displays the System Menu screen.
9[Reset] key: Returns settings to their default states.
10 [Stop] key: Cancels or pauses the job in progress.
11 [Start] key: Starts copying and scanning operations and processing for setting operations.
12 [Authentication/Logout] key: Authenticates user switching, and exits the operation for the current user (i.e. log out).
13 [Interrupt] key: Displays the Interrupt Copy screen.
14 [Numeric Keypad] key: Displays numeric keys on the touch panel.
NOTE
Long press the [Home]( ) key to switch between the Standard screen and the Accessibility screen.
12
5 9 10 11
13 12
4
6 7 8
3
14