Kyocera 408ci - Enabling User Login Administration

9-3
User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration
Enabling User Login Administration
This enables user login administration. Select one of the following authentication methods:
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
2 Select "User Login Setting" [User Login].
2
Configure the settings.
Select [Local Authentication] or [Network Authentication].
Select [Off] to disable user login administration.
If you select [Local Authentication], set [Local Authorization].
Local Authorization
(page 9-17)
If you select [Network Authentication], set [Server Settings].
Server Settings
(page 9-18)
Item Descriptions
Local Authentication User authentication based on user properties on the local user list stored in the machine.
Network
Authentication
User authentication based on Authentication Server. Use a user property stored in
Authentication Server to access the network authentication login page.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login ]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
NOTE
If you cannot login because of the setting of the machine, login with any administrator
registered in the local user list and correct the settings.
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000