Kyocera 408ci - Registering Information for a User Whose ID Is Unknown

9-55
User Authentication and Accounting (User Login, Job Accounting) > Unknown User Settings
Registering Information for a User whose ID is
Unknown
If you register user information for a user whose ID is unknown, you can check information on the Job Status or Job
History screens. In addition, you can restrict available functions.
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
2 Select "Unknown User Settings" [User Property].
2
Enter the user information.
Enter the user information > [OK]
NOTE
This function is displayed when [Unknown ID Job] is set to [Permit].
Unknown ID Job (page 9-54)
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Item Descriptions
User Name Enter the name displayed on the user list (up to 32 characters).
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000