Kyocera 408ci - Using a Fax Server to Send (Fax Server Send)

5-40
Operation on the Machine > Using a Fax Server to Send (Fax Server Send)
Using a Fax Server to Send (Fax Server
Send)
You can send a scanned document via a fax server.
1
[Home]( ) key > [Send]
2
Place the originals.
Loading Originals (page 5-2)
3
Display the screen.
In the destination screen for sending, select [+] > [Fax Server]
4
Enter recipient information.
Entering Information Directly
1 Select [Fax No. Entry].
2 Enter the fax number > [OK]
Destinations can be changed later.
Checking and Editing Destinations
(page 5-46)
Selecting from the Address Book
1 Select [Address Book].
2 Specify the destination > [OK]
Choosing from the Address Book
(page 5-43)
Destinations can be changed later.
Checking and Editing Destinations
(page 5-46)
NOTE
• A fax server is required to use this function. For information about the fax server, contact the applicable
administrator.
• FAX server settings must be configured to send a FAX.
Command Center RX User Guide
Fax Server (page 8-65)
NOTE
Use the numeric keys to enter a number.