9-32
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
PIN Login
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
2 Select "User Login Setting" [PIN Login].
2
Configure the settings.
Select [On] or [Off].
When using PIN Code Authorization, the network authentication must be enabled and [Ext.] must be selected for
server type.
Enabling User Login Administration (page 9-3)
Server Settings (page 9-18)
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000
To Next Page
Loading...
