2-30
Installing and Setting up the Machine > Login/Logout
Login/Logout
If you are setting a function that requires administrator rights, or if user login administration is enabled, you must enter
your login user name and login password.
Login
Normal login
1
Enter the login user name and login password to login.
If this screen is displayed during operations, enter the login user name and login password.
The factory default login user name and login password are set as shown below.
You will be unable to login if you forget your login user name or login password. In this event, login with administrator
privileges and change your login user name or login password.
1 If [Network Authentication] is selected as the user authentication method, authentication
destinations are displayed and either [Local] or [Network] can be selected as the
authentication destination.
2 Enter the login user name.
3 Enter the login password.
Character Entry Method
(page 11-9)
4 Select the login method from [Simple login], [PIN code login] and [IC card login].
User Authentication and Accounting (User Login, Job Accounting)
(page 9-1)
5 Check the Wi-Fi Direct environment.
6 Refer to the number of pages printed and the number of pages scanned. Displayed when
job accounting is enabled.
7 Set the language to use for the touch panel display.
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000
To Next Page
Loading...
